1
Please remove the insulating tape on the battery before first use. It is recommended
to use a fully charged lithium-ion battery with a rated voltage of 3.7V.
Please turn off the device and remove the battery when it’s not in use for more than
10 days, and store the device & battery in a dry and safe place.
Be extra cautious and handle the device with care during use or transportation. It is
recommended to use the original packaging during transportation.
Do not use the device to focus directly on strong sources of light such as the sun or
electric welding. The detector may be damaged and it will void the warranty.
Avoid lens scratches and damage caused by oil or chemical contamination of the
lens. Keep the lens cap on when not in use.
The device should be placed in a cool, dry, and ventilated environment without
strong electromagnetic fields, and the storage environment temperature should not
be lower than (-30℃/-22℉) or higher than (55℃/131℉).
Do not disassemble the device without authorization. If you encounter any
problems, please contact our after-sales team. Failure to do so will render the
warranty service null and void.
Attention! All PARD night-vision and thermal imaging devices require a license when
exported to outside your country.
Introduction
Precautions
Thank you for your continued support and for choosing PARD Leopard thermal
imaging monocular. Please read this manual carefully before using the device for
the first time. Please follow the instructions in this manual to avoid any damage
caused by improper use and to ensure that your device operates properly.
After reading, please keep this manual in a safe place, for future reference. This
manual provides step-by-step instructions on how to use your digital device and
is intended for your reference only.
Please note that PARD reserves the right to update this manual without prior
individual notifications. For the latest information and updates, we recommend
you to visit our official website. Additionally, PARD reserves the final right of
interpretation of this manual.
To Next Page
Loading...
