Pard Leopard 640 - Loop Recording; Date Stamp; Record Audio

12
Users can set whether to display the time stamp in the lower right corner of photos and
videos taken.
Press [Key 4] to enter the menu, press [Key 3] to move the cursor to the date stamp
setting option, and press [Key 2] to enter the sub-menu.
Press [Key 1]/[Key 3] to move the cursor to select “Off” or “On” options. After selection,
press [Key 2] to save and return to the previous page.
10. Loop Recording
11. Date Stamp
Users can customize the segment recording duration. This can be set up under loop
recording. When the capacity of the memory card is full, the new recording will
automatically overwrite the previous saved files. When you select “Off”, the recording will
stop when the memory card is full, and the oldest video file will not be overwritten.
Press [Key 4] to enter the menu, press [Key 3] to move the cursor to the loop recording
setting option, and press [Key 2] to enter the sub-menu.
Press [Key 1]/[Key 3] to move the cursor to select preferred loop time duration "Off",
"1 Min", "3 Min", "5 Min" or "10 Min". Press [Key 2] to save and return to the previous page.
User can set whether to record audio synchronously in the video.
Press [Key 4] to enter the menu, press [Key 3] to move the cursor to the recording audio
setting option, press [Key 2] to enter the sub-menu.
Press [Key 1]/[Key 3] to move the cursor to select “Off” or “On” option,
Press [Key 2] to save and return to the previous page.
12. Record Audio
Through the WiFi connection, you can use your phone as an external viewfinder enabling
users to synchronously see the photos and videos on a larger screen.
Press [Key 4] to enter the menu, press [Key 3] to move the cursor to the WiFi setting
option, and press [Key 2] to enter the sub-menu.
Press [Key 1]/[Key 3] to move the cursor to select “On” or “Off” option.
(1) Press [Key 2] to select "Off", and return to the previous page.
(2) Press [Key 2] to select "On" to enable WiFi and return to the home screen.
13. WiFi