—
26
—
19. Default Settings
If users decide to reset the device, it will restore the device to the factory default settings and all of the
user data and personalized settings will be deleted. Please operate with caution!
●
toggle [Key 5] to move the cursor to restore default setting option, press [Key 3] to enter the sub-
menu.
●
toggle [Key 5] to move the cursor to select "Cancel" or "OK" option. After selection, press [Key 3] to
confirm the relevant operation and return to the previous page.
●
short press [Key 3] to exit. Press and hold [Key 3] to start the blind pixel compensation. After the
process is completed, you can toggle [Key 5] to move the cursor to backup: “Yes” or “NO”. Press [Key
3] to confirm your selection.
20. Firmware Upgrade
System firmware can be updated to maintain an optimized current version.
●
toggle [Key 5] to move the cursor to the firmware upgrade option, and press [Key 3] to enter the
sub-menu. You will see an important reminder: Upgrading firmware may cause damage to the
equipment, please operate with caution!
●
short press [Key 3] to exit. Press and hold [Key 3] to confirm and return to the previous page.
Note: When performing this operation, please load the device with a fully charged battery and type-C
power supply. Powering off the device during the firmware update process may cause damage to the
device components. Please operate with caution.
To Next Page
Loading...
