—
3
—
PRECAUTIONS
●
Please remove the insulating tape on the battery before first use. It is recommended to use a fully
charged lithium-ion battery with a rated voltage of 3.7V.
●
Please turn off the device and remove the battery when it’s not in use for more than 10 days, and
store the device & battery in a dry and safe place.
●
Be extra cautious and handle the device with care during use or transportation. It is recommended
to use the original packaging during transportation.
●
Do not use the device to focus directly on strong sources of light such as the sun or electric
welding. The detector may be damaged and it will void the warranty.
●
Avoid lens scratches and damage caused by oil or chemical contamination of the lens. Keep the
lens cap on when not in use.
●
The device should be placed in a cool, dry, and ventilated environment without strong
electromagnetic fields, and the storage environment temperature should not be lower than (-30
℃
/-
22
℉
) or higher than (55
℃
/131
℉
).
●
Do not disassemble the device without authorization. If you encounter any problems, please
contact our after-sales team and report them on our official website. Failure to do so will render the
warranty service null and void.
●
Attention! All PARD night-vision and thermal imaging devices require a license when exported to
outside your country.
To Next Page
Loading...
