—
10
—
No. Name No. Name
1
Battery Cap
6
Power button
2
Keypad
7
Lens Cap
3
Clip-on eyepiece
8
LRF Module
4
Type-C Charging Port
9
Objective Lens
5
Micro SD Card Slot
10
Focus Lever
INSTALLATION
1. Unboxing
Before using this device, please do the following:
1
Open the box and remove the device.
2
Check to ensure that the package contents listed above are all included in the box.
3
Check the device for any damage to the display, body, lens, buttons, etc.
4
Make sure that the objective lens and eyepiece are clean & functioning properly.
Note: If any accessories are missing or damaged, please contact our after sales service.
To Next Page
Loading...
