Pari Compact - Performing the Inhalation

• Connectthepowercordtothe
powercordsocketofthecom
pressor.
• Plugthepowerplugintoasuitable
socket.
3.3 Performing the inhalation
Toavoidoverheatingthecompressor,neverplaceacoverover
thedeviceduringoperation,andensurethatthesideventila
tionslitsarenotobstructed.Ifthecompressoriscoveredorif
theventilationslitsareblocked,thecompressorcannotbe
cooledproperly.
• Beforestartingthetreatment,pull
thenebuliseroutoftheholder.
• Startthecompressorbypressing
theon/offswitch.
• Checkthatanaerosolisbeing
generatedbeforeyoustartwith
theinhalation.
• Performtheinhalationasdescribedintheinstructionsfor
useofthenebuliser.
en
–37–