Pari Compact - Troubleshooting

5 TROUBLESHOOTING
Fault Possiblecause Procedure
Thecom
pressordoes
notstartup.
Thepowercordisnot
pluggedintothedevice
properly.
Checkthatthepower
cordisseatedcorrectly
inthecompressor
powercordsocket.
Thepowerplugisnot
pluggedintothemains
socketproperly.
Checkthatthepower
plugisseatedcorrectly
inthemainssocket.
Nomedication
iscomingout
ofthe
nebuliser.
Thenebulisernozzleis
blocked.
Cleanthenebuliser.
Theconnectiontubingis
notconnectedproperly.
Checkthatbothendsof
thetubingareseated
properly.
Theconnectiontubingis
leaking.
Replacetheconnection
tubing.
Intheeventoffaultsthatarenotlistedinthischapter,orifthe
suggestedproceduredoesnotcorrectthefault,contactthe
PARIGmbHServiceCenter.
en
–41–