To Next PageTo Next PageWhat to do if no aerosol is coming out of my Pari Medical Equipment nebulizer?
If no aerosol is coming out of your Pari Medical Equipment nebulizer, first, check that the tubing connectors are firmly connected to both the compressor and the nebulizer. If the issue persists, replace the connection tubing. Also, ensure that you clean the nebulizer, as the nebulizer nozzle insert may be blocked.
General| Brand | Pari |
|---|---|
| Model | LC plus |
| Category | Respiratory Product |
| Language | English |
Details the intended use for lower airway diseases and patient suitability.
Lists conditions for non-use and general safety precautions for operation.
Highlights risks from small parts and emphasizes hygiene practices for safe use.
Identifies all components included in the nebuliser package.
Describes different product versions and how the nebuliser generates aerosols.
Details the materials used for components and their expected lifespan.
Guides on assembling and preparing the nebuliser for treatment.
Step-by-step instructions for conducting inhalation therapy.
Procedures for safely concluding the inhalation session.
Steps for preparing and cleaning the nebuliser components after use.
Methods for disinfecting the nebuliser parts to ensure hygiene.
Guidelines for maintaining the connection tube, inspecting parts, and drying.
Advice on how to store the product properly.
Helps users identify and resolve common problems with the nebuliser.
Provides key technical specifications and aerosol data.
Information on product disposal and interpretation of labels.
Specific reprocessing steps for professional environments.
Specific reprocessing steps for connection tubing in professional use.
