Pari COMPACT2 - Page 21

• If applicable, detach the
mouthpiece from the nebuliser.
• Attach the mask to the
nebuliser.
Filling the nebuliser
• Insert the nebuliser in the holder on the compressor in-
tended for this purpose.
• If applicable, detach the inspiratory valve from the nebuliser.
• Pour the required quantity of
inhalation solution into the top
of the nebuliser.
Note the minimum and
maximum fill volumes
[see:General nebuliser data,
page36]. If the nebuliser
contains too little or too much
liquid, the nebulisation and
consequently the therapy will
be less effective.
• Fit the inspiratory valve onto
the nebuliser.
– 21 –