16
Parker Hannifin Manufacturing Germany GmbH & Co. KG
Pump & Motor Division Europe
Chemnitz, Germany
Axial Piston Pump
Series PV, series 47 and higher
Bulletin MSG30-3245-INST/UK
Installation manual
FAILURE OR IMPROPER SELECTION OR IMPROPER USE OF THE PRODUCTS DESCRIBED
HEREIN OR RELATED ITEMS CAN CAUSE DEATH, PERSONAL INJURY AND PROPERTY
DAMAGE.
This document and other information from Parker-Hannifin Corporation, its subsidiaries and
authorized distributors provide product or system options for further investigation by users
having technical expertise.
The user, through its own analysis and testing, is solely responsible for making the final selection
of the system and components and assuring that all performance, endurance, maintenance,
safety and warning requirements of the application are met. The user must analyze all aspects
of the application, follow applicable industry standards, and follow the information concerning
the product in the current product catalogue and in any other materials provided from Parker or
its subsidiaries or authorized distributors.
To the extent that Parker or its subsidiaries or authorized distributors provide component or
system options based upon data or specifications provided by the user, the user is responsible
for determining that such data and specifications are suitable and sucient for all applications
and reasonably foreseeable uses of the components or systems.
Offer of Sale
Please contact your Parker representation for a detailed ”Oer of Sale”.
WARNING – USER RESPONSIBILITY
Position notification regarding Machinery Directive 2006/42/EC:
Products made by the Pump & Motor Division Europe (PMDE) of Parker Hannifin are excluded from
the scope of the machinery directive following the “Cetop” Position Paper on the implementation of
the Machinery Directive 2006/42/EC in the Fluid Power Industry.
All PMDE products are designed and manufactured considering the basic as well as the proven
safety principles according to:
• ISO 13849-1:2015
• SS-EN ISO 4413:2010
so that the machines in which the products are incorporated meet the essential health and safety
requirements.
Confirmations for components to be proven component, e. g. for validation of hydraulic systems, can
only be provided after an analysis of the specific application, as the fact to be a proven component
mainly depends on the specific application.
Dr. Hans Haas
General Manger
Pump & Motor Division Europe
Parker Hannifin Manufacturing Germany GmbH & Co KG
Pump & Motor Division Europe
Neefestraße 96
09116 Chemnitz, Germany
Tel: +49 (0)371 - 3937 - 0 MSG30-3245-INST/UK
Fax: +49 (0)371 - 3937 - 488
Email: pmde-pqd-support@parker.com © Copyright 2021
parker.com/pmde All rights reserved
For additional information, spare parts or service requirements please contact:
To Previous Page
Loading...
