Parker BA-DME030-E - Page 21

17
Recommended every 36 months
Valves
Deisccant
Column Seal Kits
Snowstorm Filler
Note. We recommend a visual inspection of the solenoid valve membranes every 12months. If required the membranes should be replaced using
the following kits: N/O Inlet valve membrane kit (Part No. 90 000 0101), N/C Exhaust valve membrane kit (Part No. 90 000 0105)
Description Catalogue No. Contents Order Qty
Valve Overhaul (BA-DME012-E - 040-E)
608330014
N/O Inlet solenoid valves (x2)
1
N/C Exhaust solenoid valves (x2)
Outlet check valves (x2)
Associated seals and fixings
Note. We recommend a visual inspection of the solenoid valve membranes every 12months. If required the membranes should be replaced using
the following kits: N/C Exhaust valve membrane kit (Part No. 90 000 0105).
Description Catalogue No. Contents Order Qty
Valve Overhaul (BA-DME050-E - 080-E) 608330015
Inlet cylinder valves (x2)
1
N/C Exhaust solenoid valves (x2)
N/C Exhaust solenoid valves (x2)
Outlet check valves (x2)
24V Control solenoid valve
Associated seals and fixings
Note. The quantity of desiccant material required is dependent upon the model of dryer and the specified dewpoint as illustrated below.
Ensure that the dryer is filled using a Snowstorm filler and replace the column seals.
Description Catalogue No. Contents Order Qty
Desiccant AA 608203661 11 Litre Container of AA
See
Tabl e
BA-DME012-E - 015-E BA-DME020-E - 040-E BA-DME050-E BA-DME060-E BA-DME080-E
x1 x2 x3 x4 x5
Note. One kit is required for each dryer.
Description Catalogue No. Contents Order Qty
Column Seals (BA-DME012-E - 040-E) 608203733
Moulded gaskets
1
Support screens
Column pads
Fixing screws
Description Catalogue No. Contents Order Qty
Column Seals (BA-DME050-E - 080-E) 608330010
Column o-rings
1
Description Catalogue No. Contents Order Qty
Snowstorm Filler (BA-DME012-E - 040-E) 608200622
Maxi / Midi Snowstorm Filler
1
Snowstorm Filler (BA-DME050-E - 080-E) 608201051
Jumbo Snowstorm Filler
1