5
2.3 Materials of Construction
Silencer Baffle and End Cap
Aluminium
Columns, Manifolds and Valve Blocks
Aluminium Extrusion EN AW-6063 T6
Manifold and Purge End Plates
Cast Machined EN AW-6082 T6
Inlet, Outlet and Exhaust Valve Block End Plates
Cast Machined EN AC-44100-F
Inlet and Exhaust Cylinders
Aluminium Alloy
Dryer Feet
8MM Steel Plate
Rear Mounting Plate
14SWG Mild Steel
Coalescing Filter
Aluminium Housing
Hygrometer Housing
GR316 – BS970
Fittings
Nickel Plated Brass and Nickle Plated Mild Steel
Pressure Gauge
ABS Plastic casing and dial, brass connector and movement
Adsorbant
Activated Alumina and 13X MS
Seal Materials
Nitrile, Viton, EPDM, PTFE (tape)
Paint
Epoxy coated
To Next Page
Loading...
