6
Parker Hannifin
Pump & Motor Division Europe
Trollhättan, Sweden
Hydraulic Motors
Series F11/F12
Bulletin MSG30-8205-INST/EU
Installation and Startup Manual
Position notification regarding Machinery Directive 2006/42/EC:
Products made by the Pump & Motor Division Europe (PMDE) of Parker Hannifin
are excluded from the scope of the machinery directive following the “Cetop”
Position Paper on the implementation of the Machinery Directive 2006/42/EC in
the Fluid Power Industry.
All PMDE products are designed and manufactured considering the basic as well
as the proven safety principles according to:
• ISO 13849-1:2015
• SS-EN ISO 4413:2010
so that the machines in which the products are incorporated meet the essential
health and safety requirements.
Confirmations for components to be proven component, e. g. for validation
of hydraulic systems, can only be provided after an analysis of the specific
application, as the fact to be a proven component mainly depends on the specific
application.
Dr. Hans Haas
General Manger
Pump & Motor Division Europe
To Next Page
Loading...
Need help?
General
