7
HMI (human machine interface)
3 Product description
Instruction book, IQAN- MD3
Diagnostics
Any of the IQAN-MD3 CAN buses may be dedicated for diagnostic purposes. This
function is available when using IQANdesign 2.0 version or higher.
NOTICE
It is recommended to have one CAN bus dedicated for diagnostic purposes.
Communication
The IQAN-MD3 has one RS232 port for remote diagnostics via ’dial-up’ modem
communication and one USB port for connection with a PC.
HMI (human machine interface)
IQAN-MD3 front panel HMI.
Features
IQAN-MD3 has a 3.5" transflective TFT color display, 320x240 pixels for reading
system information. The front of IQAN-MD3 consists of a control panel with a display
and nine buttons.
• F1 thru F4 function buttons.
Programmable ’softkeys’ that can be configured by IQANdesign software to bring
up a display page, bring up an adjustment group or act as a virtual input.
• Up and down arrow buttons , .
Navigation buttons that are used to scroll thru selections on a menu page. May be
configured by IQANdesign software to bring up a display page, bring up an
adjustment group or act as a virtual input.
• OK button .
Pushing this button equals ’enter’. Saves the value or confirms the selection you
have made.
• Menu button .
Always brings up the Menu page. It is not programmable.
• ’Esc’ or BACK button .
Returns you to the previous display page. May be configured by IQANdesign
software to bring up a display page, bring up an adjustment group or act as a virtual
input.
To Next Page
Loading...
