Parker IQAN-MD3 - IQAN-MD3 Menu System; Overview; System Information

9
IQAN-MD3 menu system
3 Product description
Instruction book, IQAN- MD3
IQAN-MD3 menu system
The IQAN-MD3 has an easy to use graphical user interface and menu system. In the
display’s menu system, you get access to information and settings concerning the
IQAN system.
Menu navigation flowchart.
Overview
The menu system is an easy to use set of pages in the IQAN-MD3 that allow you to see
module information and logs, set preferences, measure system I/O or adjust
parameters.
All of this is done using the control and function buttons on the face of the IQAN-
MD3. To begin, go to the main menu page by simply pressing the ’menu’ button (three
horizontal lines). You may return to the operating display at any time by pressing the
menu button again.
Main menu page.
System information
To see information about your system press the button on the main menu page under
the ’Info’ icon, F4. This will bring up the information page which displays the loaded
application name, the last person who performed an edit and when the edit was done.
Operating
display page
Menu page
Adjustment
page
Measurement
page
Preferences
page
Information
page
From any page:
Press menu to quit or
press escape to go back
to the previous page
Press menu button
Select
adjust group
Select
measure group
Select
display, time
or language
Select
module,
modem or log
Change
settings
View
information
Press a function button
Select function
or channel
Select raw or
scaled value
Change
parameters or
reset to defaults
View
measurements
menu button
Main
Measure
Adjust Preferences Info