Need help?Do you have a question about the Parker Matrx Digital MDM and is the answer not in the manual?
Pressure and Flow Requirements| pressure requirements | 50 to 55 psi |
|---|---|
| flow requirements | 10 LPM minimum flow |
| oxygen inlet pressure requirements | 50 to 55 psi |
| oxygen inlet flow requirements | 30 LPM minimum flow |
Environmental| storage temperature | -10°F to 120°F (-17°C to 48°C) |
|---|---|
| operating temperature | 72°F nominal (22°C) |
| humidity | ambient, non-condensing |
Electrical| domestic input voltage supply | 115 VAC nominal |
|---|---|
| domestic input line frequency | 60Hz |
| domestic circuit protection | two 2.5 amp time delay fuses |
| international input line frequency | 50–60Hz |
| international circuit protection | two 2.5 amp time delay fuses |
Weight and Dimensions| width | 8 inches |
|---|---|
| height | 5.5 inches |
| depth | 10 inches |
| weight | 6 lbs |
To Next Page
