Parker Matrx Digital MDM - Requirements and Features; Bag Tee (Breathing Bag) Requirements; Use of Scavenging; Room Ventilation

ii
Table of Contents
Notes and Contact Information ............................................................................. iv
Introduction .............................................................................................................. 1
Intended Use .............................................................................................................. 1
User and Installer Responsibility ............................................................................... 1
System Notes ............................................................................................................. 1
NFPA Requirements and Warnings........................................................................... 1
Section 1 Installation Instructions .......................................................................................... 3
1.1 Description ................................................................................................................. 3
1.2 Planning ..................................................................................................................... 3
1.3 Pre-Installation ........................................................................................................... 4
1.4 Mixer Head Installation .............................................................................................. 4
1.5 Bag Tee and Scavenging Control Valve Installation ................................................. 6
1.6 J Hook Installation...................................................................................................... 8
1.7 Hose Connection ....................................................................................................... 8
1.8 Rubber Goods Installation ......................................................................................... 9
1.9 Installation of Power Cord and Protective Earth (ground) Connection .................... 10
Section 2 Specifications ......................................................................................................... 11
2.1 Minimum Space Requirements ................................................................................ 11
Section 3 Safety Checks ........................................................................................................ 11
3.1 Final Connection Checklist ...................................................................................... 11
3.2 Cross Pipeline Tests ................................................................................................ 11
3.3 Gas Outlet Station Tests .......................................................................................... 11
3.4 Mixer Tests .............................................................................................................. 11
Section 4 Return Information and Warranty ........................................................................ 12
4.1 Return Goods Procedure ......................................................................................... 12
4.2 Warranty .................................................................................................................. 12
Section 5 Replacement Parts................................................................................................. 13