13
Section 5 Replacement Parts
The following replacement parts may be obtained from Digital MDM®:
Matrx Part No. Description
20183200 Power Cord (USA)
10545100 Instruction Manual
63882537 Fuse: 2.5 amp, 250 volt, slo-blo (time delay) 5 mm by 20 mm
(Note: international 220-240 volt units require two fuses)
91515087 Autoclavable nitrous scavenging assembly Adult
91515088 Autoclavable nitrous scavenging assembly Medium
91515089 Autoclavable nitrous scavenging assembly Pediatric
62939600 Vacuum gauge (scavenger control valve)
91525136 Swing arm assembly, with mounting hardware
91505112 Pre-installation kit (shutoff valves)
91316043 3 liter breathing bag
Mounting Fasteners
91525141 Hardware Kit, 1” screws, tee nuts, (4) black caps
91525169 Hardware Kit, swing arm “wall side”
91525137 Hardware Kit, 1/2” screws, tee nuts, (4) black caps
91525142 Hardware Kit, 1” screws, tee nuts, (4) pebble grey caps
Installation Templates
63936200 10” bezel
63936300 12-5/8” bezel, unit centered
63938200 12-5/8” bezel, with O2 Quick Connect
63940000 Bag tee, scavenging control valve
63939900 Swing arm (wall side template)
63940100 Flush swivel bag tee (alone) template
63940400 Undercounter hinge
To Next Page
Loading...
