6
Specifications
900FH
Maximum Flow Rate:
90 GPH (341 LPH)
Port Size
7/8"-14 UNF (SAE J1926)
(female threads)
Min. Service Clearance:
Above Assembly
Below Assembly
7.5 in. (19.1 cm)
2.0 in (5.1 cm)
Replacement Filter:
(2 micron)
(10 micron)
(30 micron)
(1 Per Assembly)
New: 2040N-02 (Old: 2040SM-OR)
New: 2040N-10 (Old: 2040TM-OR)
New: 2040N-30 (Old: 2040PM-OR)
Height 17.0 in. (43.2 cm)
Depth 7.0 in. (17.8 cm)
Width 6.0 in. (15.2 cm)
Weight (dry) 6.0 lb (2.7 kg)
Clean Pressure Drop 0.30 PSI (0.021 bar)
Maximum Pressure
1
15 PSI (1.03 bar)
Water In Bowl Capacity: 10.3 oz (305 ml)
Available Options:
(water detection kit)
2
(12 or 24 vdc heater)
2
(vacuum gauge)
(12 or 24 vdc primer pump)
Yes
Yes
Yes
Yes
Water Removal Efficiency 99%
Ambient Temperature Range
-40
o
to +255
o
F (-40
o
to +124
o
C)
Maximum
Fuel Temperature 190°F (88°C)
1
Pressure installations are applicable up to the maximum PSI shown.
Vacuum installations are recommended.
2
Not for use on gasoline applications.
Note: Units with 1/2" NPT ports are available, contact the factory.
900FH
To Next Page
Loading...
