400 Series
Spin-on Fuel Filter/Water Separators
Contact Information:
Parker Hannin Corporation
Racor Division
P.O. Box 3208
3400 Finch Road
Modesto, CA 95353
phone 800 344 3286
209 521 7860
fax 209 529 3278
racor@parker.com
www.parker.com/racor
Overview
400 Series Spin-on Fuel Filter/Water
Separators are designed to handle
today’s tough gasoline and diesel
filtration problems and may be used on
the vacuum or pressure side of the fuel
transfer pump.
Filtration needs should be based on
application, fuel quality, operating
climates, and maintenance schedules.
If you have questions about this
product, contact our Technical Support
Department, 8 AM to 5 PM, Pacific
Standard Time, Monday through Friday,
at (800) 344-3286 ext. 7555.
Instruction Part Number 22209 Rev F
Product Features:
• Hand (palm) operated fuel
priming pump
• Proprietary, high-capacity,
water-repelling Aquabloc
®
II
filters available in 2, 10, and
30 micron.
• Reusable contaminant
collection bowls with self-
venting drain.
• 4-port die-cast aluminum head
(two inlets, two outlets) and a
unitized mounting bracket for
installation convenience.
• Optional 12 or 24 volt DC, 200
watt, in-bowl fuel heater, water
detection kit, and vacuum gauge
available. Danger! Optional
parts are not for use with gasoline
applications.
To Next Page
Need help?
General
