Parker Zander K-MT 10 - Technical Product Description; Summary Drawing Standard Dryer

EN | User Manual Technical product description
14 K-MT 10-95/D3
Technical product description
Summary Drawing Standard Dryer*
*Planned dryers may differ in their con guration (in this case, refer to the enclosed dimen-
sional drawing)
Dewpoint sensor
Compressed air outlet
Vessel pressure gauge
On/Off-Switch
Compressed air inlet
Power supply connector
Upstream  lter
Discharge point
Check valve block
Differential pressure gauge
Downstream  lter
Control cabinet
Muf er
Transport lugs
Vessel
Solenoid valve block