26
GB MT
Operation
Remove the rechargeable
battery from the device to
prevent accidental operation.
Risk of injury!
Ensure that the ambient tem-
perature does not exceed
-
ing work.
Removing/inserting
theBattery
Checking the battery
chargelevel
The battery’s (5) charge level is indicated
by the charge state indicator (9).
red-yellow-green => Battery fully charged
red and yellow => Battery half charged
red => Battery needs to be charged
Recharging the battery
Allow a hot battery to cool before
charging.
Charge the battery (5) when only
illuminated.
ance if necessary.
2. Insert the battery (5) in the charging com
3. Plug the battery charger (17) into a
mains outlet.
the mains.
5. Pull the battery (5) out of the battery
charger (17).
Overview of the LED indicators on
the charger (17):
Green LED illuminated while the
rechargeable battery is not inserted:
Charger is ready
Green LED lights up: Battery is charged
Red LED lights up: Battery charging
RedLEDashes:
Choice of gear
Slide the gear selector (3) to 1 or 2,
selection.
1st gear .............................
2nd gear .........................
A gear change may only be
Set the direction of
rotation
the direction switch (clockwise and anticlock
wise direction) and secure the device against
tion switch indicates the working direction.
To Next Page
Loading...
Need help?
General
