33
5. Place the impact protection on the side
position.
Switching On and Off
(Fig. H)
2. Make a loop in the end of the power
-
supply.
4. Before switching on, ensure that the
equipment is not in contact with any
objects.
After switching off the equi-
pment, the blade continues to
turn for several seconds. Do
not touch the moving blade.
There is a risk of injury.
Wheel drive
2. Wheel drive on: Pull the drive
The machine starts up.
3. Wheel drive off: Let go of the drive
Working with the
Lawnmower
Regular mowing encourages increased foli-
ation of the grass and kills off weeds at the
same time. Therefore, not only does each
mowing increase the density of the lawn, it
also produces an evenly resilient lawn.
at a growth height of 70 – 80 mm. In the
main vegetation period, the lawn is to be
mowed at least once a week.
away from the socket.
-
hind you and when you turn, move it to
the side that has already been mowed.
in tracks that are as even as possible.
For gap-free mowing, the tracks should
always overlap by a few centimetres.
is not overloaded. Otherwise, the mo-
tor may be damaged.
slope. Take particular care when going
backwards and pulling the equipment.
Maintenance and Storage”.
Switch off the equipment after
work and in order to transport it,
disconnect the plug and wait until
the blade stops. There is a risk of
injury.
To Next Page
Loading...