PSBSAP 20-Li A1
■ 2
│
GB
│
IE
│
NI
CORDLESS HAMMER DRILL SET
PSBSAP 20-Li A1
Introduction
Congratulations on the purchase of your new
tool. You have chosen a high-quality product. The
operating instructions are part of this product. They
contain important information about safety, usage
and disposal. Before using the product, please
familiarise yourself with all operating and safety
instructions. Use the product only as described and
for the range of applications specified. Please also
pass these operating instructions on to any future
owner.
Intended use
This tool is intended for screwing in and removing
screws as well as drilling in wood, metal, ceramic
and plastic and impact drilling in bricks and masonry.
It is not suitable for impact drilling in natural stone
such as granite. The light on this tool is intended to
illuminate the immediate work area of the tool.
Use this product only as described and for the
areas of applications specified. The tool is not
intended for commercial use. Any other usage or
modification of the tool is deemed to be improper
and carries a significant risk of accidents. The
manufacturer accepts no responsibility for damage
attributable to misuse.
Features
Additional handle
Depth stop
Teeth on the depth stop
Mounting ring for the additional handle
Locking button for the depth stop
Speed selector switch
Rotation direction switch/lock
ON/OFF switch/speed control
Belt clip
LED work light
- Torque selection ring
3 Chuck
Fig. A
! Battery pack
. Release button for the battery pack
0 High-speed charger
6 Battery display LED
1 Battery charge level button
% Red charge control LED
+ Green charge control LED
Fig. B
, Cutter knife (incl. 8 spare blades)
25 mm bits (2x 36 pcs; 2x bit holders)
/ 1/4” ratchet screwdriver
Metal/wood drill bit set
" Measuring tape
# 1/4” screwdriver
IB_329697_PSBSAP20-LiA1_LB6.indb 2 26.08.20 17:08
To Next Page
Loading...
Need help?
General
