What to do if my Parkside Saw motor does not reach its full power?
If the motor isn't reaching its full power, it could be due to overloaded circuits in the network, possibly from other motors or equipment. Try not to use any other equipment or motors on the same circuit.
Why does my Parkside 102787 motor overheat easily?
The motor may be overheating due to overloading or insufficient cooling. Avoid overloading the motor during cutting tasks. Additionally, remove any dust from the motor to ensure it cools effectively.
General| Type | Circular Saw |
|---|---|
| Power | 1200 W |
| No-load speed | 5500 RPM |
| Cutting depth (at 90°) | 65 mm |
| Weight | 3.8 kg |
| Power Source | Corded Electric |
To Next Page
