Parkside 303129 - English; Table of Contents

PGS 500 A1
GB
│
IE
│
NI
│
1 ■
Contents
Introduction ......................................................2
Intended use ................................................................ 2
Features ................................................................... 2
Package contents ............................................................ 2
Technical data .............................................................. 2
General Power Tool Safety Warnings ................................3
1. Work area safety .......................................................... 3
2. Electrical safety ........................................................... 3
3. Personal safety ............................................................ 4
4. Power tool use and care .................................................... 4
5. Service .................................................................. 5
Safety instructions for all applications ............................................ 5
Additional safety instructions for all applications .................................... 7
Supplementary safety instructions for grinding ...................................... 7
Supplementary safety instructions for working with wire brushes. . . . . . . . . . . . . . . . . . . . . . . . 8
Original accessories/auxiliary equipment ......................................... 8
Use .............................................................8
Changing/inserting the tool/collet chuck. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 8
Grinding stone .............................................................. 8
Switching on and off/setting speed range ......................................... 9
Notes on working with materials/tools/speed range ................................ 9
Cleaning, care and storage .........................................9
Kompernass Handels GmbH warranty ..............................10
Service .........................................................11
Importer .......................................................11
Disposal ........................................................11
Translation of the original Conformity Declaration .....................12