Parkside PWSA 20-Li E4

CORDLESS ANGLE GRINDER
AKKU-WINKELSCHLEIFER MEULEUSE
D’ANGLE SANS FIL PWSA 20-Li E4
MEULEUSE D’ANGLE SANS FIL
Traduction des instructions d’origine
AKKU-WINKELSCHLEIFER
Originalbetriebsanleitung
CORDLESS ANGLE GRINDER
Translation of the original instructions
AKU ÚHLOVÁ BRUSKA
Překlad originálního provozního návodu
ACCU-HAAKSE SLIJPMACHINE
Vertaling van de originele gebruiksaanwijzing
AKUMULÁTOROVÁ UHLOVÁ
BRÚSKA
Preklad originálneho návodu na obsluhu
AKUMULATOROWA
SZLIFIERKA KĄTOWA
Tłumaczenie oryginalnej instrukcji obsługi
AMOLADORA ANGULAR
RECARGABLE
Traducción del manual de instrucciones original
BATTERIDREVEN VINKELSLIBER
Oversættelse af den originale driftsvejledning
SMERIGLIATRICE ANGOLARE
RICARICABILE
Traduzione delle istruzioni d’uso originali
AKKUS SAROKCSISZOLÓ
Az originál használati utasítás fordítása
AKUMULATORSKI KOTNI
BRUSILNIK
Prevod originalnega navodila za uporabo
АКУМУЛАТОРЕН ЪГЛОШЛАЙФ
Превод на оригиналното ръководство за експлоатация
POLIZOR UNGHIULAR
Traducerea instrucţiunilor de utilizare original
ΕΠΑΝΑΦΟΡΤΙΖΟΜΕΝΟΣ
ΓΩΝΙΑΚΟΣ ΤΡΟΧΟΣ
Μετάφραση των αυθεντικών οδηγιών λειτουργίας
AKU KUTNA BRUSILICA
Prijevod originalnih uputa za uporabu
IAN 443996_2207

Parkside PWSA 20-Li E4 Specifications

General

Battery Voltage	20 V
Disc Diameter	125 mm
Spindle Lock	Yes
Restart Protection	Yes
Battery Type	Lithium-Ion
Spindle Thread	M14

Summary

Product Introduction

Intended Use

Defines the appliance's purpose and limitations for safe operation.

General Power Tool Safety Warnings

Work Area, Electrical, and Personal Safety

Comprehensive safety guidelines covering workplace, electrical hazards, and personal protection.

Power Tool Use, Care, and Service

Cordless Battery Handling

Specific Safety Instructions

Kickback Prevention and Safety

Explains kickback and provides crucial instructions for safe operation and prevention.

Grinding and Abrasive Cutting Safety

Specific safety protocols for performing grinding and abrasive cutting tasks with the tool.

Additional Abrasive Cutting Safety

Safe Cutting Practices and Precautions

Further safety measures for abrasive cutting, focusing on disc handling and workpiece support.

Safety Guidelines for Battery Chargers

Charger Safety and Compatibility

Accessory Guidelines and Working Procedures

Rough Grinding and Abrasive Cutting

Before Use Operations

Battery and Component Management

Battery Pack Handling and Checks

Guard and Handle Fitting

Disc Installation and Operation

FittingChanging Discs and Safety

Detailed steps for fitting and changing discs, including safety checks and procedures.

Switching Appliance On and Off

Operation Modes and Maintenance

Operation Modes and Speed Adjustment

Ordering Replacement Parts

Batteries and Chargers