Parkside PWSA 20-Li E4 User Manual

PWSA 20-Li E4
■
172
│
DK
Bestilling af ekstra batteri og oplader
Du kan nemt bestille et ekstra batteri eller en oplader på internettet på www.kompernass.com.
♦ Scan QR-koden med din smartphone/tablet.
Med denne QR-kode kommer du direkte til vores webside og kan se og bestille de tilgængelige
reservedele.
BEMÆRK
► Hvis du har problemer med online-bestillingen, kan du henvende dig telefonisk eller pr. e-mail til vo-
res servicecenter.
► Oplys altid artikelnummeret (IAN) 443996_2207, når du afgiver din bestilling.
► Vær opmærksom på, at det ikke er muligt at foretage online-bestilling af reservedele i alle lande.

Parkside PWSA 20-Li E4 Specifications

General

Battery Voltage	20 V
Disc Diameter	125 mm
Spindle Lock	Yes
Restart Protection	Yes
Battery Type	Lithium-Ion
Spindle Thread	M14

Summary

Product Introduction

Intended Use

Defines the appliance's purpose and limitations for safe operation.

General Power Tool Safety Warnings

Work Area, Electrical, and Personal Safety

Comprehensive safety guidelines covering workplace, electrical hazards, and personal protection.

Power Tool Use, Care, and Service

Cordless Battery Handling

Specific Safety Instructions

Kickback Prevention and Safety

Explains kickback and provides crucial instructions for safe operation and prevention.

Grinding and Abrasive Cutting Safety

Specific safety protocols for performing grinding and abrasive cutting tasks with the tool.

Additional Abrasive Cutting Safety

Safe Cutting Practices and Precautions

Further safety measures for abrasive cutting, focusing on disc handling and workpiece support.

Safety Guidelines for Battery Chargers

Charger Safety and Compatibility

Accessory Guidelines and Working Procedures

Rough Grinding and Abrasive Cutting

Before Use Operations

Battery and Component Management

Battery Pack Handling and Checks

Guard and Handle Fitting

Disc Installation and Operation

Fitting/Changing Discs and Safety

Detailed steps for fitting and changing discs, including safety checks and procedures.

Switching Appliance On and Off

Operation Modes and Maintenance

Operation Modes and Speed Adjustment

Ordering Replacement Parts

Batteries and Chargers