To Next PageTo Next Page
Need help?Do you have a question about the Parkside PWSA 20-Li C3 and is the answer not in the manual?
General| Battery Voltage | 20 V |
|---|---|
| Disc Diameter | 125 mm |
| Spindle Lock | Yes |
| Battery Type | Lithium-Ion |
| No-load Speed | 10, 000 rpm |
Guidelines for maintaining a clean, well-lit work area and avoiding explosive atmospheres.
Instructions on plug matching, avoiding grounded surfaces, and protecting the tool from rain or wet conditions.
Advice on staying alert, using PPE, preventing unintentional starts, and maintaining balance.
Instructions on charging battery units, using correct batteries, storage, and handling battery fluid leaks.
Covers using approved accessories, fitting discs correctly, ensuring blade guard security, and proper disc application.
Advice on avoiding disc blockage, deep cuts, working area awareness, and handling pocket cuts.
Explains kickback as a sudden reaction from tool/accessory jamming, causing uncontrolled rotation.
Provides advice on holding the tool firmly, avoiding body parts in the kickback path, and careful corner work.
Advises wearing gloves, checking disc dimensions, using correct flanges, and ensuring disc cleanliness.
Details on locking the spindle, using the spanner, placing the disc, and tightening the clamping nut.
Describes fitting thin discs with the clamping nut collar facing upwards, securing the spindle, and tightening.
Describes fitting thick discs with the clamping nut collar facing downwards, locking the spindle, and tightening.
Instructions for checking the tool, switching on, switching off, and engaging continuous operation modes.
