Parkside PWSA 20-Li C3 User Manual

PWSA 20-Li C3
GB
│
IE
│
NI
│
9 ■
Safety guidelines for battery
chargers
■ This appliance may be used by
children aged 8 years and above
and by persons with limited phys-
ical, sensory or mental capabilities
or lack of experience and knowl-
edge, provided that they are under
supervision or have been told how
to use the appliance safely and are
aware of the potential risks. Do not
allow children to use the appliance
as a toy. Cleaning and user mainte-
nance tasks may not be carried out
by children unless they are super-
vised.
■ To avoid potential risks, damaged
mains cables should be replaced
by the manufacturer, their customer
service department or a similarly
qualified person.
The charger is suitable
for indoor use only.
WARNING!
■ To avoid potential risks, damaged mains
cables should be replaced by the manufac-
turer, their customer service department or a
similarly qualified person.
ATTENTION!
♦ This charger can only charge the following
batteries: PAP 20 A1/PAP 20 A2/PAP 20 A3 .
♦ A current list of battery compatibility can be
found at www.lidl.de/Akku.
Permissible accessories
Max. diameter Ø (mm)
Max. thickness (mm)
Thread size (mm)
Max speed (rpm)
Max. circumferential
speed (m/s)
Tool
Blade guard
Cutting disc 125 3 M14 12250 80
Two-hole mounting
spanner
Yes
Roughing disc 125 6 M14 12250 80
Two-hole mounting
spanner
Yes

Parkside PWSA 20-Li C3 Specifications

General

Battery Voltage	20 V
Disc Diameter	125 mm
Spindle Lock	Yes
Battery Type	Lithium-Ion
No-load Speed	10, 000 rpm