4
GB CY
Content
Introduction .................................4
Intended purpose .........................4
General description ......................5
Extent of the delivery ........................5
Overview ........................................5
Functional description ....................... 5
Technical data .............................. 5
Safety instructions ........................6
Symbols and icons ...........................6
General safety instructions for
power tools .....................................7
Initial start-up ............................ 11
Checking the battery charge level ....11
Inserting/removing the device’s
battery pack ..................................11
Selecting a tool ..............................11
Changing the tool ..........................11
Inserting an SDS Plus tool ................12
Removing an SDS Plus tool .............. 12
Inserting tools with hexagonal and
cylindrical shafts ............................12
Introduction
Congratulations on the purchase of your
new device. With it, you have chosen a
high quality product.
During production, this equipment has
been checked for quality and subjected to
equipment is therefore guaranteed.
important information on safety, use
and disposal. Before using the prod-
uct, familiarise yourself with all of
the operating and safety instructions.
Use the product only as described
Keep this manual safely and in the
Translation of the original EC
declaration of conformity ..........105
Exploded drawing ...................113
Removing tools with hexagonal and
cylindrical shafts .............................12
Removing the keyless chuck ............. 12
Operation ..................................12
Selecting the operating mode ..........12
Set the direction of rotation .............12
Switching on/off ............................ 13
Cleaning and maintenance ......... 13
Cleaning .......................................13
Maintenance .................................13
Storage ......................................13
Disposal and protection of the
environment ..............................13
Guarantee .................................14
Repair Service ............................15
Service-Center ............................15
Importer .................................... 15
Replacement parts/accessories ...16
Trouble shooting ........................16
event that the product is passed on,
hand over all documents to the third
party.
Intended purpose
into brick, concrete and rock, as well as for
non-impact drilling into wood, metal, cera-
mic and plastic. Electrical tools with electro-
nic regulation and right/left-hand rotation
are also suitable for screwing.
Any other use that is not explicitly ap-
proved in these instructions may result in
damage to the equipment and represent a
serious danger to the user.
-
cidents causing injury to other people or
damage to property.
To Next Page
Loading...
Need help?
General