EasyManua.ls Logo

Parkside PHD 100 E2 - Working with the Equipment

Parkside PHD 100 E2
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
2 0
and understand the associated
dangers. Children must not play
with the device.
Use the equipment only on a
at, stable surface.
The transport handle is exclu-
sively for transporting the equip-
ment. The equipment is portable
but not to be carried during
operation.
For your safety, it is recom-
mended that you wear safety
glasses, safety boots and gloves
and, if necessary, ear protec-
tion.
In the event of a fault or defect
during operation, immediately
switch off and unplug the equip-
ment. Then read page 28 of the
operating instructions for pos-
sible fault causes or contact our
service centre.
Working with the equipment
Caution: to avoid accidents
and injuries:
CAUTION. pressure
washers can be dan-
gerous if they are not
operated correctly!
The jet must never
be directed at peo-
ple, animals, electric
equipment connected
to the power supply
or against the actual
pressure washer.
Do not direct the jet at your-
self or others in order to clean
clothes and shoes.
Do not operate the pressure
washer when other people are
in the immediate vicinity, other
than they are also wearing pro-
tective clothes.
Always use the spray gun with
both hands. This will enable
you to safely counter the recoil
force from the emerging water
jet.
Take appropriate measures to
keep children away from the
equipment whilst it is running.
Dispose of the packaging mate-
rial correctly.
Do not use the equipment in the
vicinity of ammable liquids or
gases. Non-observance will re-
sult in a risk of re or explosion.
Do not spray combustible liq-
uids. Risk of explosion.
Store the equipment in a dry
place and out of reach of chil-
dren.
Children must be supervised in
order to ensure that they do not
play with the equipment.
Ensure that no exhaust emis-
sions occur within the vicinity of
air inlets.
Caution! To avoid damage
to the equipment and any
possible person injury
resulting from this:
Do not work with damaged or
incomplete equipment, or with
equipment that has been con-
verted without the approval of
the manufacturer. Before initial
operation, have a specialist
check that the required

Related product manuals