Parkside PHD 100 E2 - Translation of the Original EC Declaration of Conformity

3 1
Translation of the
original EC declaration
of conformity
We hereby conrm that the
Pressure Washer
Design Series PHD 100 E2
Serial number
201603000001 - 201603148000
conforms with the following applicable relevant version of the EU guidelines:
2000/14/EG • 2006/42/EG
2014/30/EU • 2011/65/EU*
In order to guarantee consistency, the following harmonised standards as well as natio-
nal standards and stipulations have been applied:
EN 60335-1:2012+A11:2014 • EN 60335-2-79:2012 • EN 62233:2008
EN 55014-1/A2:2011 • EN 55014-2:1997+A1:2001+A2:2008
EN 61000-3-2:2014 • EN 61000-3-3:2013
We additionally conrm the following in accordance with the 2000/14/EC emissions
guideline:
Guaranteed sound power level: 98 dB(A)
Measured sound power level: 94.2 dB(A)
Compliance evaluation process carried out in accordance with Appendix V,
2000/14/EC
This declaration of conformity is issued under the sole responsibility of the manufacturer:
Grizzly Tools GmbH & Co. KG
Stockstädter Straße 20
63762 Großostheim, 10.04.2016
Germany
Volker Lappas
Documentation Representative
GB
* The object of the declaration described above satises the provisions of Directive 2011/65/EU of the Euro-
pean Parliament and the Council of 8June 2011 on limiting the use of certain harmful substances in electrical
and electronic appliances.