Parkside PHD 110 C1 - General Description; Technical data

GB MT
30
17 ON / OFF switch
18 High-pressure connection on the
gun side
D
19 Locking lever
Functional description
The pressure washer is to be used for
washing with a high-pressure water jet. A
detergent can be added if this is required.
For the functions of the operating elements
please refer to the subsequent description.
Ensure that the safety instructions are al-
ways observed!
Technical data
Pressure Washer .........PHD 110 C1
Mains connection ............. 230 V~, 50 Hz
Power consumption ....................1300 W
Mains cable .....................................5 m
Weight (incl. all parts) ...................5.5 kg
Safety class ...................................... II
Degree of protection .........................IPX5
Inow temperature (T in max) ...........40 °C
Inow pressure (p in max) .. 0.8 MPa (8 bar)
Operating pressure (p) ... 7.5 MPa (75 bar)
Max. operating pressure
(p max) ....................... 11 MPa (110 bar)
Pumping rate, water (Q)............... 5 l/min
Max. pumping rate, water
(Q max) .................................. 6.6 l/min
Acoustic pressure level
(L
pA
) ....................... 77 dB(A); K
pA
=3 dB
Sound power level (L
WA
)
measured ......88.72 dB(A); K
WA
=2,24 dB
guaranteed ............................ 91 dB(A)
Vibration (a
h
) .......................... ≤2,5 m/s
2
The operating conditions during measuring
and the procedures used for measuring in
accordance with EN 60335-2-79:2012.
General Description
Extent of the Delivery
Unpack the pressure washer and verify the
contents:
- Pressure washer
- Gun
- High-pressure hose
- Jet lance
- High-pressure nozzle
- Adjustable at-jet nozzle
- Cleaning agent container with nozzle
- Accessories holder
- Nozzle cleaning pin
- Translation of the original instructions for use
The diagram of the most impor-
tant functional elements can be
found on the foldout sides.
Overview
A
1 High-pressure connection on the
washer side
2 Jet lance
3 Carrying handle
4 Gun
5 Gun holder
6 Nozzle cleaning pin
7 High-pressure connection
8 Power supply cable
9 High-pressure hose holder
10 Water connection with sieve in-
sert (not visible)
11 Adjustable at-jet nozzle
12 High-pressure nozzle
13 Nozzle holder
14 Jet lance holder
15 Cleaning agent container with
nozzle
16 Cleaning agent container /
Power supply cable holder