What to do if my Parkside PHD 110 E1 does not generate any pressure?
If your Parkside Pressure Washer doesn't generate any pressure, start by turning on the washer with the high-pressure hose attached until bubble-free water flows from the high-pressure connection. Also, check the water mains to ensure there isn't a drop in pressure.
Why my Parkside PHD 110 E1 Pressure Washer does not transport water?
If your Parkside Pressure Washer isn't transporting water, it might have air trapped inside. Try switching on the equipment and pulling the lever of the gun. If this does not help, bleed the equipment, following steps 6. - 9.
How to troubleshoot a Parkside PHD 110 E1 that is not operating?
If your Parkside Pressure Washer isn't operating, first, ensure the ON/OFF switch is in the correct position. Then, inspect the power supply cable for any damage; if damaged, a qualified electrician should replace it. Also, check your electrical system to ensure it matches the rating plate data.
Lists all items included in the pressure washer package.
Visual guide to the main functional elements of the pressure washer.
Explains the purpose and basic operation of the pressure washer.
Provides specifications such as voltage, power, pressure, and noise levels.
Explains the meaning of warning and instruction symbols used in the manual.
Details the specific symbols found within the operating instructions.
Covers general safety practices, child safety, and operational surface requirements.
Step-by-step instructions for assembling and preparing the pressure washer for use.
Instructions on how to safely connect the pressure washer to the power supply.
How to temporarily pause the operation of the pressure washer.
Step-by-step guide to safely shut down the pressure washer.
Details on how to clean the pressure washer and its accessories safely.
Information regarding the maintenance requirements of the pressure washer.
Explains the scope and limitations of the product's guarantee.
Steps to follow when making a warranty claim or seeking service.
Details of the product importer.
Information on how to obtain replacement parts and accessories.
General| Max. Pressure | 110 bar |
|---|---|
| Power Consumption | 1400 W |
| Hose Length | 5 m |
| Voltage | 230 V |
| Frequency | 50 Hz |
| Cable Length | 5 m |
| Flow Rate | 330 l/h |
To Next Page