GB MT
28
Trouble shooting
Problem Possible cause Remedy
Washer
is not
operating
ON / OFF switch (3) is turned
off
Check ON / OFF switch.
Damaged power
supply cable (7)
Check power supply cable (7) for
damage. If necessary have the power
supply cable replaced by a qualied
electrician.
Mains fault
Check the electrical system for conformi-
ty with the data on the rating plate.
Washer
does not
transport
water
Air trapped in the pressure
washer
Switch on the equipment and pull the
lever of the gun (13).
Bleed the equipment, see steps 6. - 9.
Washer
does not ge-
nerate any
pressure
Air trapped in the pressure
washer
Turn on the washer with high-pressure
hose until bubble-free water ows out of
the high-pressure connection (9).
Drop in the water mains
pressure
Check the water mains.
To Next Page
Loading...
