Parkside PHD 110 E1 - Translation of the original EC declaration of conformity

151
GB
MT
Translation of the original
EC declaration of conformity
We hereby conrm that the
Pressure washer
Design Series PHD 110 E1
Serial number
000001 - 391000
conforms with the following applicable relevant version of the EU guidelines:
2006/42/EC • 2014/30/EU • 2000/14/EC & 2005/88/EC
2011/65/EU* & (EU) 2015/863*
In order to guarantee consistency, the following harmonised standards as well as natio-
nal standards and stipulations have been applied:
EN 60335-1:2012+A11+A13+A1+A14+A2 • EN 60335-2-79:2012
EN 62233:2008 • EN 55014-1:2017+A11 • EN 55014-2:2015
EN IEC 61000-3-2:2019 • EN 61000-3-3:2013+A1 • EN IEC 63000:2018
We additionally conrm the following in accordance with the 2000/14/EC emissions
guideline:
Guaranteed sound power level: 97 dB(A)
Measured sound power level: 92,1 dB(A)
Compliance evaluation process carried out in accordance with Appendix V,
2000/14/EC
This declaration of conformity is issued under the sole responsibility of the manufacturer:
Christian Frank
Documentation Representative
Grizzly Tools GmbH & Co. KG
Stockstädter Straße 20
63762 Großostheim, 30.03.2022
Germany
* The object of the declaration described above satises the provisions of Directive
2011/65/EU of the European Parliament and the Council of 8 June 2011 on limiting the use
of certain harmful substances in electrical and electronic appliances.