4
GB IE NI
Introduction
Congratulations on the purchase of your
new device. With it, you have chosen a
high quality product.
During production, this equipment has
been checked for quality and subjected
to a nal inspection. The functionality of
your equipment is therefore guaranteed. It
cannot be ruled out that residual quantities
of water or lubricants will remain on or in
the equipment/hose lines in isolated cases.
This is not a fault or defect and it repre-
sents no cause for concern.
The operating instructions constitute part of
this product. They contain important infor-
mation on safety, use and disposal.
Before using the product, familiarise your-
self with all of the operating and safety
instructions. Use the product only as de-
scribed and for the applications specied.
Keep this manual safely and in the event
that the product is passed on, hand over
all documents to the third party.
Areas of Application
Only use the pressure cleaner in the follow-
ing private home areas:
• To clean machines, vehicles, buildings,
work tools, facades, terraces, gardening
tools, etc. with a high-pressure water jet.
• Only use with original accessories and
spares.
• Cleaning the object according to its
manufacturer’s information.
General Description
The diagram of the most im-
portant functional elements
can be found on the foldout
side.
Content
Introduction .................................4
Areas of Application ....................4
General Description ......................4
Scope of Delivery.............................5
Functional description ....................... 5
Overview ........................................5
Technical data ..............................5
Notes on Safety ...........................6
Explanation of symbols .....................6
Symbols in the manual ......................6
General notes on safety ...............7
Start-up .......................................9
Setting up .......................................9
Mains connection ...........................10
Operation .....................................10
Interrupting operation .....................11
Ending operation ...........................11
Using detergents ............................11
Cleaning and Maintenance .........11
Cleaning .......................................11
Maintenance .................................12
Storage ...................................... 12
Waste Disposal and Environmental
Protection ..................................12
Guarantee .................................12
Repair Service ............................13
Spare parts/Accessories .............14
Service-Center ............................14
Importer ....................................14
Trouble shooting ........................15
Translation of the original EC
declaration of conformity ............31
To Next Page
Loading...
Need help?
General
