Parkside PHD 135 A1 User Manual

5
NI
IEGB
14 Locking lever
15 Jet lance
16 Holder for high-pressure hose
17 Holder for mains cable
18 Control button
19 Cleaning agent container with
nozzle
20 High-pressure tting device side
21 High-pressure tting on the
device (not visible)
22 Turbo dirt blaster
23 High-pressure tting
24 Release button
25 High-pressure tting (gun)
26 Cleaning agent
Technical data
Pressure cleaner ........ PHD 135 A1
Mains connection ............. 230 V~, 50 Hz
Power consumption ....................1800 W
Mains cable length ............................ 5 m
High-pressure hose length ...................7 m
Weight (without accessories) ..........7.5 kg
Safety class ...................................... II
Degree of protection .........................IPX5
Rated/operating pressure (p) ..........9 MPa
Max. permissible pressure (p max) 13.5 MPa
Max. inow pressure (p in max) ... 0.8 MPa
Max. inow temperature (T in max) ..40 °C
Pumping rate, water (Q)............ 5.2 l/min
Max. pumping rate, water
(Q max) ..................................... 7 l/min
Sound pressure level
(L
pA
) .................. 77.24 dB(A); K
pA
= 3 dB
Sound power level (L
WA
)
measured ...89.25 dB(A); K
WA
= 3.27 dB
guaranteed ........................... 93 dB(A)
Vibration (a
h
) .......................... ≤2,5 m/s²
The values for noise and vibration were
determined according to
EN 60335-2-79:2012.
Scope of Delivery
Unpack the pressure cleaner and verify the
contents:
- Pressure cleaner with mains cable
- Quick connector for garden hose
adaptor
- Jet gun
- Turbo dirt blaster
- Standard Vario nozzle
- Nozzle cleaning needle
- Cleaning agent container with nozzle
- 0.5 l cleaning agent
- Instructions for use
Dispose of the packaging material correctly.
Functional description
The pressure cleaner cleans by means of a
water jet, with a choice of high or low pres-
sure operation.
A detergent can be added if this is required.
For the functions of the operating elements
please refer to the subsequent description.
Ensure that the safety instructions are always
observed!
Overview
A
1 Bow-type handle
2 High-pressure hose
3 On/Off switch
4 Mains cable
5 Wheels
6 Water connection coupling with
strainer insert
7 Water connection
8 Holder for spray gun
9 Jet gun
10 Accessories holder (not visible)
11 Standard Vario nozzle
12 Nozzle cleaning needle
13 Starting lever

Parkside PHD 135 A1 Specifications

General

Brand	Parkside
Model	PHD 135 A1
Category	Pressure Washer
Language	English