EasyManuals Logo

Parkside PHD 135 A1 User Manual

Parkside PHD 135 A1
34 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #8 background imageLoading...
Page #8 background image
8
GB IE NI
out by an authorised electri-
cian. In the case of repairs,
always contact our service
centre.
Electrical safety:
Caution: to avoid ac-
cidents and injuries
from electric shocks:
The plug and socket of an ex-
tension cable must be water-
tight!
Unsuitable extension ca-
bles can be dangerous as
people can be harmed by
an electric shock!
Protect the electric plug con-
nections against moisture.
If there is a risk of ooding,
x the plug connections in an
area that is safe from ood-
ing.
Ensure that the mains voltage
matches the specications on
the rating plate.
Connection to the mains
must be carried out by an
experienced electrician and
meet the requirements of
IEC60364-1.
The electrical installation
shall be according to nation-
al wiring rules.
The device must only be con-
nected to a mains socket
via a residual-current circuit
breaker (RCD) with a rated
leakage current of not more
than 30 mA. Fuse: at least
13 ampere.
Before each use, check the
equipment, cable and plug
for damage.
If you come into contact with
cleaning agents, rinse with
plenty of clean water.
Store the equipment in a dry
place and out of reach of
children.
Caution! To avoid
damage to the equip-
ment and any pos-
sible person injury
resulting from this:
Do not work with damaged
or incomplete equipment, or
with equipment that has been
converted without the ap-
proval of the manufacturer.
Before initial operation, have
a specialist check that the
required electrical protection
measures are in place.
Do not operate the equip-
ment if the mains cable, wa-
ter supply or other important
parts such as the high-pres-
sure hose or gun are dam-
aged/leaking.
Protect the pressure cleaner
from frost and dry running.
High-pressure hoses, ttings
and couplings are important
for machine safety. Use only
high-pressure hoses, ttings
and couplings recommended
by the manufacturer.
Use only original accessories
and do not carry out conver-
sion work on the equipment.
Please read the notes in the
operating instructions on the
topic of “maintenance and
cleaning”. Any measures
above and beyond these,
particularly opening the
equipment, are to be carried

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the Parkside PHD 135 A1 and is the answer not in the manual?

Parkside PHD 135 A1 Specifications

General IconGeneral
BrandParkside
ModelPHD 135 A1
CategoryPressure Washer
LanguageEnglish

Related product manuals