Parkside PHD 170 A1 - Translation of the original EC declaration of conformity

48
GB IE
NICY
Translation of the original EC
declaration of conformity
We hereby conrm that the
Pressure washer
Design Series PHD 170 A1
Serial Number
201909000001 - 201909265000
conforms with the following applicable relevant version of the EU guidelines :
2014/30/EU • 2000/14/EC • 2006/42/EC • 2005/88/EC • 2011/65/EU*
In order to guarantee consistency, the following harmonised standards as well as national
standards and stipulations have been applied:
EN 60335-1:2012/A13:2017 • EN 60335-2-79:2012
EN 55014-1:2017 • EN 55014-2:2015 • EN 62233:2008
EN 61000-3-2:2014 • EN 61000-3-11:2000 • EN 62321-1:2013
We additionally conrm the following in accordance with the 2000/14/EC emissions
guideline:
Sound power level
guaranteed: 97 dB(A)
measured: 94,5 dB(A)
Compliance evaluation process carried out in accordance with
Appendix III, 2000/14/EC
This declaration of conformity is issued under the sole responsibility of the manufacturer:
Christian Frank
Documentation Representative
Grizzly Tools GmbH & Co. KG
Stockstädter Straße 20
63762 Großostheim
Germany
01.10.2019
* The object of the declaration described above satises the provisions of Directive 2011/65/
EU of the European Parliament and the Council of 8 June 2011 on limiting the use of certain
harmful substances in electrical and electronic appliances