To Next PageTo Next PageWhy does the Parkside PKS 1500 A1 Saw motor start up slowly?
If the motor starts up slowly and does not reach operating speed on your Parkside Saw, the voltage might be too low, the coils could be damaged, or the capacitor might be burnt. Contact the utility provider to check the voltage. Arrange for a specialist to inspect the motor and replace the capacitor.
Why does my Parkside Saw motor overheat easily?
The motor may be overheating due to overloading or insufficient cooling. Avoid overloading the motor during cutting tasks. Additionally, remove any dust from the motor to ensure it cools effectively.
What to do if my Parkside PKS 1500 A1 Saw motor does not reach its full power?
If the motor isn't reaching its full power, it could be due to overloaded circuits in the network, possibly from other motors or equipment. Try not to use any other equipment or motors on the same circuit.
Why does my Parkside PKS 1500 A1 Saw motor make excessive noise?
Excessive noise from the motor could indicate damaged coils or a defective motor. Arrange for a specialist to inspect the motor.
What to do if the workpiece pulls away and/or splinters when using my Parkside PKS 1500 A1?
If the workpiece pulls away or splinters, it might be because of excessive cutting pressure or an unsuitable saw blade. Insert a suitable saw blade.
How to fix a rough or wavy saw cut with my Parkside PKS 1500 A1 Saw?
A rough or wavy saw cut can occur if the saw blade is dull or the tooth shape isn't right for the material thickness. Resharpen the saw blade, or use a more suitable saw blade.
How to fix Parkside PKS 1500 A1 Saw when motor does not work?
If the motor of your Parkside Saw does not work, the motor, cable, or plug might be defective, or the fuses might have an issue. Check the fuses and replace them if necessary. Arrange for inspection of the machine by a specialist. Never attempt to repair the motor yourself due to the danger involved.
Why does the Parkside PKS 1500 A1 Saw motor make excessive noise?
If you notice the motor making excessive noise, it may be due to damaged coils or a defective motor. Arrange for the motor to be inspected by a specialist.
What to do if the Parkside PKS 1500 A1 Saw motor does not work?
If the motor of your Parkside Saw does not work, the motor, cable, or plug may be defective, or the fuses may be burnt. Arrange for a specialist to inspect the machine. Never attempt to repair the motor yourself due to danger. Check the fuses and replace them if necessary.
Why doesn't my Parkside PKS 1500 A1 motor reach its full power?
If your Parkside Saw motor isn't reaching its full power, it might be because the circuits in your network are overloaded with other equipment or motors. To resolve this, avoid using other equipment or motors on the same circuit while operating the saw.
General| Power | 1500 W |
|---|---|
| Blade Diameter | 190 mm |
| Cutting Angle | 0° - 45° |
| Weight | 4.6 kg |
| No-load speed | 5000 rpm |
| Cutting depth max. at 0° | 65 mm |
| Cutting depth max. at 45° | 45 mm |
| Cable length | 2 m |
| Max cutting depth at 90° | 65 mm |
| Cutting Depth | 65 mm |
| Saw blade | 190 mm |
