To Next PageTo Next PageWhat to do if my Parkside PLEM 20 A3 Analytical Instruments show a hardware failure?
If a hardware failure icon appears even after turning the Parkside Analytical Instruments off and on repeatedly, it is recommended to take the product to a specialist workshop.
Why does my Parkside Analytical Instruments show a calculation error?
If your Parkside Analytical Instruments display a calculation error, ensure that you are operating within the correct measuring range.
Why does my Parkside Analytical Instruments say operating temperature is too low or too high?
If your Parkside Analytical Instruments indicate that the operating temperature is too low or too high, make sure that you are using the device within the correct operating temperature range of 0 °–40 °C.
General| Voltage | 3 V |
|---|---|
| Type | Laser Distance Meter |
| Laser class | Class 2 |
| Operating temperature | 0°C to 40°C |
| Battery | 2 x AAA |
| Power | < 1 mW |
Specifies the intended use of the product for measuring distances, lengths, and heights indoors.
Details the various components and parts of the laser distance measurer.
Provides critical safety guidelines and warnings related to battery handling and usage.
Guide on how to insert or replace the batteries in the device.
Instructions for powering the laser distance measurer on and off.
How to change the measurement unit displayed on the device.
Step-by-step process for measuring distances using the laser measurer.
Instructions for switching to and using continuous measurement.
Instructions for switching to and using single measurement.
Details the product warranty period, terms, and conditions.
Explains the steps to follow when making a warranty claim.
Provides contact information for product service and support.
