Parkside PLS 48 C1 Original Instruction

7
PLS 48 C1
GB
IE
CY
4. Power tool use and care
a) Store idle power tools out of the reach of children and do not allow
persons unfamiliar with the power tool or these instructions to operate
the power tool. Power tools are dangerous in the hands of untrained
users.
b) Maintain power tools. Check for misalignment or binding of moving
parts, breakage of parts and any other condition that may affect the
power tool’s operation. If damaged, have the power tool repaired be-
fore use. Many accidents are caused by poorly maintained power tools.
c) Use the power tool, accessories and tool bits etc. in accordance with
these instructions, taking into account the working conditions and the
work to be performed. Use of the power tool for operations different from
those intended could result in a hazardous situation.
5. Service
■ Have your power tool serviced by a qualified repair person
using only identical replacement parts. This will ensure that the
safety of the power tool is maintained.
■
Always ensure that the power plug or the pow-
er cord is replaced only by the manufacturer
of the appliance or by an approved customer
service provider. This will ensure that the safety of
the appliance is maintained.
Original accessories/auxiliary equipment
■ Use only the additional equipment and accessories specified
in the operating instructions. Using attachments or accessory
tools other than those recommended in the operating instructions
can lead to a risk of injury.

Parkside PLS 48 C1 Specifications

General

Brand	Parkside
Model	PLS 48 C1
Category	Soldering Gun
Language	English