Parkside PLS 48 C1 Original Instruction

GB
IE
CY
10
PLS 48 C1
Switching off:
NOTE
► After use, always replace the soldering iron
in the coil
spring .
♦ Move the ON/OFF switch
into the “0” position.
Always remove the plug from the socket when not in use.
Soldering sponge
NOTICE!
► The hot soldering tip
must never come into contact with a
dry soldering sponge . Otherwise, the soldering sponge can
be damaged.
NOTE
► The soldering sponge is used to clean the soldering tip.
► Dampen the soldering sponge before use.
Soldering
Vapours can lead to headaches and fatigue if inhaled.
■ The soldering iron has a rated power output of 48 watts and is
ideal for electronic solders.
■ Its design makes it especially suitable for difficult-to-access and
fine soldering work.
♦ Clean the soldering tip
on the moist soldering sponge .
♦ After cleaning, the soldering tip must be tinned. Tin the hot
soldering iron tip by melting the solder
.
♦ Guide the soldering tip to the solder joint and heat it.

Parkside PLS 48 C1 Specifications

General

Brand	Parkside
Model	PLS 48 C1
Category	Soldering Gun
Language	English