Parkside PMFS 200 C3 - Appliance-specific safety instructions; Before Use; Fitting;changing the sander plate

PMFS 200 C3
GB
│
IE
│
1 ■
Contents
Introduction ............................................................2
Intended use ........................................................................2
Features ...........................................................................2
Package contents ....................................................................2
Technical specifications ...............................................................2
General power tool safety warnings .......................................3
1. Work area safety ..................................................................3
2. Electrical safety ...................................................................3
3. Personal safety ....................................................................3
4. Power tool use and care ............................................................4
5. Service ..........................................................................4
Appliance-specific safety instructions .....................................................5
Before use .............................................................5
Fitting/changing the sander plate .......................................................5
Selecting a sanding sheet ..............................................................6
Fitting the sanding sheet ...............................................................6
Dust extraction ......................................................................7
Dust box ...........................................................................7
Reducer ...........................................................................7
Use ................................................................... 7
Switching on and off .................................................................7
Setting the oscillating speed ............................................................7
Working procedures ..................................................................8
Maintenance and cleaning ................................................8
Disposal ............................................................... 8
Kompernass Handels GmbH warranty .....................................9
Service ............................................................... 10
Importer .............................................................10
Translation of the original Conformity Declaration ...........................11