Parkside PMTS 180 A1 - English; Default Chapter; Table of Contents

PMTS 180 A1
GB
│
IE
│
NI
│
1 ■
Contents
Introduction ......................................................2
Intended use ................................................................ 2
Features ................................................................... 2
Package contents ............................................................ 2
Technical data .............................................................. 2
General Power Tool Safety Warnings ................................3
1. Work area safety .......................................................... 3
2. Electrical safety ........................................................... 4
3. Personal safety ............................................................ 4
4. Power tool use and care .................................................... 5
5. Service .................................................................. 5
Safety instructions for abrasive cutting appliances ......................5
1) Safety instructions for abrasive cutting appliances ................................ 5
2) Kickback and corresponding safety instructions .................................. 6
Further safety instructions for abrasive cutters .........................7
Original accessories/auxiliary equipment ......................................... 9
Before use .......................................................9
Setting up the appliance ...................................................... 9
Removing / inserting transport safety devices ..................................... 10
Operation ......................................................10
Switching on and off ........................................................10
Setting the cutting depth ......................................................10
Changing the cutting disc .....................................................10
Clamping the workpiece .....................................................11
Cleaning and maintenance ........................................11
Disposal ........................................................11
Kompernass Handels GmbH warranty ..............................11
Service .........................................................13
Importer .......................................................13
Translation of the original Conformity Declaration .....................13