Need help?Do you have a question about the Parkside PMTS 180 A1 and is the answer not in the manual?
Maintain a clean and well-lit work area to prevent accidents and distractions during operation.
Ensure proper grounding, avoid wet conditions, and inspect cords to prevent electric shock hazards.
Stay alert, use PPE, avoid overreaching, and dress appropriately to prevent injuries.
Use the correct tool, maintain it properly, disconnect power before adjustments, and store safely.
Have the power tool serviced by qualified personnel using identical replacement parts to maintain safety.
Ensure users are clear of rotating disc, use correct discs, and adhere to speed limits.
Understand kickback causes and take precautions like holding the tool firmly and avoiding specific areas.
Fix the appliance securely to a stable base using drill holes and ensure a mains socket is accessible.
Learn to remove and insert transport safety devices for safe handling and storage of the appliance.
Insert the plug, press the ON/OFF switch to start, and release it to stop the tool.
Adjust the cutting depth using the provided hex key, referencing the warning for injury risk.
Safely change the cutting disc after unplugging, checking for damage and using correct tools.
Clamp the workpiece firmly using the vice, ensuring proper distance from the rotating disc.
Adjust the cutting angle by loosening, setting, and retightening the angle adjustment mechanism.
Keep proof of purchase; warranty covers material/manufacturing faults within three years of purchase.
Warranty is not prolonged by repairs; report defects immediately after unpacking.
Warranty covers material/production faults, excluding normal wear and tear or damage from misuse.
Contact service with receipt and item number for defect reporting and returns.
To Next Page
General