Parkside PMTS 180 A1 - English; Default Chapter; Table of Contents

PMTS 180 A1
GB
│
IE
│
NI
│
CY
│
1 ■
Contents
Introduction ............................................................2
Intended use ........................................................................2
Features ...........................................................................2
Package contents ....................................................................2
Technical data ......................................................................3
General Power Tool Safety Warnings ......................................3
1. Work area safety ..................................................................4
2. Electrical safety ...................................................................4
3. Personal safety ....................................................................4
4. Power tool use and care ............................................................5
5. Service ..........................................................................5
Safety instructions for abrasive cutting appliances ............................5
1) Safety instructions for abrasive cutting appliances ........................................5
2) Kickback and corresponding safety instructions ..........................................6
Further safety instructions forabrasive cutters ...............................7
Original accessories/auxiliary equipment ................................................10
Before use ............................................................10
Setting up the appliance .............................................................10
Removing/inserting transport safetydevices ..............................................10
Operation ............................................................10
Switching on and off ................................................................10
Setting the cutting depth ..............................................................10
Changing the cutting disc .............................................................10
Clamping the workpiece .............................................................11
Cleaning and maintenance ..............................................11
Disposal ..............................................................12
Kompernass Handels GmbH warranty ....................................12
Service ...............................................................13
Importer .............................................................13
Translation of the original Conformity Declaration ...........................14