To Next PageTo Next Page
Need help?Do you have a question about the Parkside PTPK 400 B1 and is the answer not in the manual?
General| Power | 400 W |
|---|---|
| Suction Height | 7 m |
| Cable Length | 10 m |
| Voltage | 230 V |
| Frequency | 50 Hz |
| Max Immersion Depth | 7 m |
Details the intended uses and limitations for the submersible water pump.
Explanation of how the float switch automatically controls the pump's operation.
Key specifications including power, flow rate, head, and dimensions.
Graph showing pump performance under optimal conditions.
Definitions of safety symbols found on the device and within the manual.
Critical safety advice for operating the pump without risk.
Safety guidelines to prevent accidents and injuries during equipment use.
Instructions for attaching the angle adaptor and fitting the float switch.
How to connect hoses or tap connectors to the pump's outlet.
Guidance on how to position or hang the pump in the water.
Information on correctly connecting the pump to the power supply.
Procedure for starting and stopping the pump.
Explanation of how the float switch enables automatic operation.
Specific conditions and duration applicable to the product guarantee.
How the guarantee period is managed and customer statutory rights.
Explanation of what the guarantee covers regarding defects and wear.
Contact details for authorized service centers.
Contact information for the product's importer.
Steps to diagnose and fix problems when the pump fails to start.
Troubleshooting steps for when the pump is not discharging water.
Solutions for issues where the pump fails to stop automatically.
